SAWMILL EXCHANGE

Sawmill Operation in South Carolina
 

Ad #10438: Complete hardwood sawmill: Fulghum 24' rosserhead debarker with live deck and bark conveyor, #1 Frick, automatic, right hand, all steel, 4 headblocks, air set, 3 air dogs, 20' carriage, Mellott hydraulic log turner, Berry 213 hydraulic carriage drive with drive assembly mounted at rear of sawmill, 52" inserted tooth saw, 3 shoulders missing, 125 HP Westinghouse 3-phase electric motor. Carriage needs some work. Includes 21' 3-strand live deck, 26" sawdust blower, sawdust conveyor, slab belt. Corley 8" x 60" Combination Gang Edger with automatic set, two 125 HP motors. Includes extra saws and spacers. Very good condition. Includes jump chain to edger, 12" infeed rolls, 60" 9' outfeed tailing belt conveyor, 3-strand 9' rooftop chain to trimmer, 19' deadroll conveyor to resaw, 30' slab conveyor, sawdust conveyor. Newman 2-saw trimmer, 16' length, push button set, movable, includes two saws with some teeth missing. Needs some work. Includes 3-strand 45' separation deck/green chain from trimmer to green chain, 25' block conveyor, sawdust conveyor. 48" Precision 3-knife chipper, 75 HP 3-phase. Needs some work. Includes 5' screen and Phelps loading system.  All electrical, starters, cables included. Complete set of transfers, decking and sawdust removal. Many extras.....$80,000.00

Breakdown of individual components:

Fulghum 24' rosserhead debarker. Was running when removed from service. Cutterhead, slide rail and wheels need repair. 3-phase power.

  - 16' 3-strand log deck, includes drives

  - 30' bark conveyor for debarker

#1 Frick, automatic, right hand, all steel, 4 headblocks, air set, 3 air dogs, 20' carriage, Mellott hydraulic log turner, Berry 213 hydraulic carriage drive with drive assembly mounted at rear of sawmill, 52" inserted tooth saw, 3 shoulders missing, 125 HP Westinghouse 3-phase electric motor. Carriage needs some work. Photo

  - 21' 3-strand log deck with #78 chain, includes stop and loader

  - Sawdust blower, 26" wide, 60" diameter. Very good condition. Includes pulleys and belts on metal frame and motor base.

  - Sawdust conveyor from carriage, mounted on 10" I-beam.

  - 9' drop belt for slabs

Corley 8" x 60" Combination Gang Edger with automatic set, two 125 HP motors. Includes extra saws and spacers. Very good condition.

  - Jump chain to edger, 12" infeed rolls Photo

  - 9' outfeed tailing belt conveyor, 60" width, good condition Photo

  - 3-strand 9' rooftop chain to trimmer, #78 chain

  - 19' deadroll conveyor to resaw, 16" width

  - 30' slab conveyor, 15" width

  - Sawdust conveyor

Newman 2-saw trimmer, 16' length, push button set, movable, includes two saws with some teeth missing. Needs some work. Photo

  - 3-strand 45' separation deck/green chain from trimmer to green chain

  - 25' block conveyor

  - Sawdust conveyor

48" Precision 3-knife chipper, 75 HP 3-phase. Needs some work. Photo

  - 5' screen

  - Phelps loading system

All electrical, starters, cables included.

Extra Equipment

  - Two 75 HP motors ($750.00 each)

  - 4 Allen Bradley #5 starters

  - Large band saw for large woodworking shop

  - 8" pump with 200 HP motor

  - Two 6" pumps with 100 HP motors 220/440, 1770 RPM

  - Large spool of cable

  - Several pieces of 20' channel iron

  - 20' angle iron

  - Punch press with table. Very nice.

  - Cutoff saw for metalworking

  - Metal work table with vice

  - Extra edger saws, belts, pulleys, sprockets, cables, lights

For Sale Separately:

Ad #10440: 1999 ITE chip van, similar to Peerless, open top, new tires, around 42' length.....$18,000.00

Ad #10441: Gearmatic winch to fit on D-7 or D-8 Cat, 1" cable, over $50,000 new.....$12,000.00 Photo