Toll Free 800-459-2148 Local 205-969-0007
Links to Equipment for Sale Pages
Manual Feed Band Sawmills Automatic Feed Band Sawmills Hydraulic Band Sawmills
Higher Production Band Sawmills 1-2 Man Circular Sawmills Handset Circular Sawmills
Auto/Semiauto Circular Sawmills Support Equipment
Complete Operations For Sale Auxiliary Equipment Industrial Equipment
These higher production automatic and semiautomatic circular sawmills are normally purchased by experienced sawyers for commercial use. These mills normally require 3 or more experienced operators.
All equipment listed is privately owned. We do not represent any manufacturers or dealers. If you are interested in talking with any of the owners about their equipment for sale, please contact us at: US/Canada Toll Free: 800-459-2148 or Local: 1-205-969-0007.
New listings and price reductions are listed in
RED for one month.| State/ Province |
Mill Type |
Ad # |
Automatic/Semiautomatic Circular Sawmills |
Price (U.S.$) |
Alabama |
Dimension Mill | 7799 | Dimension mill: Esterer sash gang, Miner 4"x32" 3-saw edger, Morbark rosserhead debarker, Bush chipper w/shaker and vibrating conveyor, 20' end trim, Windham 12000# forklift, 70' 3-strand green chain, 100' bark conveyor, infeed and outfeed rolls. Detroit power runs everything except electric power on edger. 10-12 man operation. Click HERE for more details on the inventory of the complete sawmill operation. | $120,000.00 |
Alaska |
Circle | 6591 | 01C Frick, Helle automatic setworks, Renco 6" vertical edger, Mellott cab w/heat, tapers, 4 headblocks, 15' carriage. 275 HP 671 Detroit power. | $30,000.00 |
Alberta |
Circle | 9078 | 2003 Slidetech circular sawmill, hydraulic feed deck, hydraulic controls, log turner, sawdust blower, 42" headsaw and topsaw, mud saw, onboard saw sharpener, operator controlled saw guides. 60 HP 3-phase, 480V. Carriage runs on nylon slides. Can saw logs up to 32" diameter x 21' length. Runs smooth and quiet. Produces smooth finish on lumber. | $53,000.00 |
Alberta |
Circle | 12595 | 1999 KARA Master with topsaw, 145 KVA Volvo genset 2200 hours, enclosed with all controls and panels, step up transformers for 120,240,480,600 volt, 24' carriage with slab return, end dogging, hydraulic log turner, three insert tooth blades from 38" to 42", 16" topsaw blade, on-board sharpener, auto sizer, 20' infeed log deck, 6' green chain with slab conveyor. Can demonstrate. | $63,000.00 |
British Columbia |
Circle | 10616 | Custom built 72" circular sawmill, include both automatic and handset 12' carriages, all steel except for wood deck, left hand, mounted on high-boy flat bed trailer, 3 headblocks, 52" headsaww, 36" topsaw, hydraulic log turner, roll case with air kicker. Selling without power. Husk, arbors and carriage are all adjustable. Includes 3 pallets of extra parts and components and air compressor. | $18,000.00 US$ |
British Columbia |
Circle | 12250 | Galbraith & Sully headrig, 3 headblocks, 20' carriage, MPM setworks, pneumatic top & bottom dogs, cant flipper, log turner, 60' track, 200 HP on bottom saw, 75 HP on top saw, laser light, Salem 60 HP draw works, enclosed Forestech cab w/joystick control, and a/c, Digitron console with subframe | $7,500.00 US$ |
|
New Listing British Columbia |
Circle | 12924 | SALEM 42" automatic mill, right hand, all steel, 40,000 lbs., adjustable track, 150 HP 3-phase 575V, Tyrone Berry hydraulic feedworks 100 HP, 2 headblocks, 8' carriage, saw cab with computer setworks and controls, 56" headsaw, 4-strand live deck with stop & load, sawdust and wastewood chain with Radicon drive, outfeed conveyor. MORBARK 40" rosserhead debarker with bucksaw on Fruehauf trailer, 3-strand infeeed deck, 4-strand outfeed transfer rollcase. This debarker was debarking 75,000 bf per shift when taken out of service. All electrical included along with a variety of conveyors, transfers and decking. Will separate. | $90,000.00 US$ |
Illinois |
Circle | 12379 | 01 Frick, all steel, left hand, automatic with all hydraulic controls, 2 headblocks, 2 hydraulic dogs, 12' carriage, 50' laminated track with steel legs every 6', Mellott hydraulic log turner, hydraulic 30' 2-strand live infeed deck, 52" inserted tooth saw, sawdust blower. New wheels, new bearings and other new components. Meadows 6" x 36" gang edger, totally rebuilt. 671 Detroit power with 5-speed transmission. Everything built heavy duty. Runs great. Can demonstrate. Offers considered. | $20,000.00 |
Indiana |
Circle | 8897 | Helle, automatic, right hand, 2 headblocks, 12' carriage, live rollers, hydraulic feed and drive, chain log turner, 3 56" headsaws, operator cab, 100 HP 3-phase. Meadows 4x26 3-saw edger, 9' table, 3 phase power, HMC rosserhead debarker with cab, babbits need repouring, 40 HP 3-phase. Was sawing over 200 ties per day or 8,000 bf of lumber per when retired from service. Click HERE for photos of the inventory of the sawmill operation. | $30,000.00 |
Indiana |
Circle | 12578 | Meadows #2, right hand, portable on a single axle trailer, replaced most of the hand setworks with hydraulics, 3 headblocks, 13' carriage, 52" inserted tooth headsaw, hydraulic headblock receder, sawdust chain, Detroit (probably 238 truck engine) diesel power unit with transmission and pulley on steel wheel wagon. Includes Miner 4"x32" 4-saw edge, currently set up for PTO, can easily be changed back to V-belt drive. | $10,000.00 |
Iowa |
Circle | 10492 | HMC 50" automatic mill, electric over air, all steel, right hand, 4 headblocks, 17' carriage, Tyrone Berry carriage drive, saw cab. No blade. No power. | $12,500.00 |
Iowa |
Circle | 10618 | Frick Timber Tiger, Size 5, automatic, air over hydraulic, right hand, all steel, 40" carriage opening, 3 headblocks, top and bottom air dogs, 15' carriage, air setworks, HMC vertical edger, saw cab with heat and a/c, Mellott hydraulic log turner, 56" headsaw. Several hydraulic power packs all set up to run off one large power unit. Power not included. | $30,000.00 |
| Kansas | Circle | 3485 |
Meadows #2, automatic, Hendrickson setworks, 3 headblocks, 1 hydraulic hammer dog, hydraulic bar type log turner, mudsaw, 54" headsaw, 52" topsaw, 2"x43" 6-saw gang edger, 3 strand log deck, 300 Cummins recently rebuilt. |
$12,500.00 |
| Kentucky | Circle | 8189 | Edmiston, automatic, right hand, 4 headblocks, 16' carriage, 26' live deck, 40' live rolls, 36' 3-strand green chain, slab dump w/50' conveyor, Meadows 4"x36" 3-saw edger, Precision Chip Pak, Case W-14B loader, Mack truck, 2 chip trailers, V-16 Detroit w/500 KW genset. | Reduced $62,500.00 |
Louisiana |
Circle | 11906 | Sawmill operation: EDMISTON 40" automatic mill, portable, right hand, 4 headblock 16' carriage, hammer dog, hydraulic setworks, dogs, and carriage drive, 60'+ track frame, Sawyers cab, husk frame with 54" inserted tooth blade, 25 3-strand live log deck to mill with stop-n-loader, Edmiston Log turner, sawdust chain; 40' main mill roll-case, chain transfer to VANCE 8 x 40" combination gang-edger with hydraulic setworks, 30 4-strand lumber deck with rooftop chain, 35 4-strand green chain, 30' Roll-case at end of green chain, 50 slab conveyor belt. CAT 400 HP Diesel power units runs the sawmill and edger. MORBARK 640 rosserhead debarker with 25 4-stand live infeed deck and extra long (36') out-feed. MORBARK 48" ChipPak with screen, 15HP electric motor and blower, waste conveyors, motor control center. Includes electrical disconnects and starters. Everything in very good condition. | $105,000.00 |
Massachusetts |
Circle | 8719 | Sanborn 42" automatic circular sawmill, right hand, all steel, hydraulic shotgun feed, 16' carriage, 4 headblocks, pantograph, complete topsaw assembly with 30 HP 3-phase motor. No headsaw or topsaw blades. Some 3-phase motors available. Around $200.000 new. Reduced from $90,000 for quick sale. | $45,000.00 |
Michigan |
Circle | 11333 | 1999 Meadows #3 Deluxe fully hydraulic automatic sawmill. 4HB 16' carriage. Edmiston 2 saw vertical edger (hydraulic driven off mandrel). 4' x 5' deluxe cab. Meadows computer setworks. 40' 3 strand green chain. 32' 2 strand log deck with stop and load. Renco chain type log turner. (2) 56" f style saws (1 is new). 4 laser lights. 400 Cummins with 10 speed transmission direct drive power unit. Live offbearer. Phelps blower. Will be running until sold. Excellent condition. Click HERE for photos of the sawmill operation. | $90,000.00 |
Mississippi |
Circle | 12559 | Sawmill Operation: CORINTH Automatic Sawmill, right hand, Tyrone Berry hydraulic feed works, 16' carriage with 3 headblocks, two 56" inserted tooth saws with tooth changing tools, Mellott 3-strand live deck with stop & load, Mellott hydraulic chain log turner, New 200 HP drive motor, MINER 4x36 2-saw edger, 40 HP 3-phase power, Completely rebuilt 54" FULGHUM 6-knife chipper, horizontal feed top discharge with shaker screen 2" holes, 150 HP 3-phase, 48" BELOIT 6-knife chipper horizontal feed top discharge, no power, SULAIR air compressor sitting on a 200 gallon tank, PRECISION knife sharpener, 14'x40' green chain, sawdust chain, two 25' live conveyors, 30' live conveyor, 14' 3-chain descrambler, and double ended cutoff saw, 24" blades, 15 HP on each saw. Mill is completely 3-phase electric and includes all necessary electric equipment. Click HERE for photos of the sawmill operation. | $50,000.00 |
Mississippi |
Circle | 12767 | Helle automatic mill with #1 Meadows carriage, 2 headblocks, saw cab, 2-strand live deck with stop & load, chain log turner, SawTech computer setworks, 56" headsaw, barn sweep, 100 3-phase motor on the mill with soft start, each major component comes with its own electric motor, hydraulic power pack controls all hydraulics on carriage and headblocks, second hydraulic controls log turner and feedworks, third hydraulic power pack controls husk and barn sweep, Miner 4"x32" 3-saw edger, 30 HP 3-phase power. Averaging over 200 ties daily. | $29,000.00 |
North Carolina |
Circle | 11805 | Edmiston right hand 38" modular mill, 3 headblocks, 10.5' carriage, 54" headsaw, Edmiston setworks, cab & controls, chain type log turner, 30" top saw with 30 HP motor, 9 slab drop belt with 50 HP hydraulic unit, . | $19,500.00 |
North Carolina |
Circle | 11806 | Edmiston left hand 38" modular mill, 3 headblocks, 10.5' carriage, 54" headsaw, Edmiston setworks, cab & controls, chain type log turner. No power. Includes 9 slab drop belt with 50 HP hydraulic unit. | $19,750.00 |
Nova Scotia |
Circle | 10563 | Complete sawmill and planing mill: Sawmill consists of Forano 30" Cambio debarker with Cambio 50 HP infeed and 20 HP outfeed. Smaller logs transfer to PHL 16' circular scragg mill with cab and SilvaTech computer setworks, two 50 HP motors followed by Valley slab resaw, 40 HP. Larger logs transfer to Calvert Super Swede 30" hydraulic carriage with top and bottom saws 100 HP and 40 HP, 4 headblocks, saw cab, SilvaTech computer setworks and drive, 7.5 HP. Custom built hydraulic canter. 16' x 12' hydraulic log deck with motor, 30' x 12' hydraulic log deck with motor. PHL 8" x 48" combination edger with 2 chrome top press rolls, 6 chrome bottom feed rolls, at least 50 extra blades. PHL 48" 4-knife chipper with cylone, 125 HP, Chipshaker 100' trough and chip screen. Canadian 2-man trimsaw. Leroy 20 HP air compressor. Double end trim saw. Lumber sorting deck. Includes tables, feeds, motors, sawdust blowers, pumps, more. Planing mill consists of Newman Model 500 6"x15" 4-sided planer, 6 knives, pineapple infeed, 75 HP. Includes profiles for planing and flooring. Yates 48" single head band resaw, 40" bandwheels, tilts to produce siding, 40 HP. Includes 10 HP blower. Producing 40,000 to 50,000 board feet per shift. | $325,000.00 US$ |
Nova Scotia |
Circle | 11064 | 2003 KARA F2000, 42" headsaw with 100 HP motor and soft start, only used for one 6-month job. Retrofitted with heavy built 24' 4-strand infeed log deck with stop & load, 26" topsaw with 15 HP motor, end dogging, slab dropper table, lumber dropping device with bidirectional capability to either green chain or back to the operator, hydraulic log turner, 25' carriage, hydraulic wheel for live/flitch sawing, 35' heavy built 4-strand green chain, sawdust blower, brand new motors for decking and green chain, KARA Model 88 sharpener. Includes 100 KW genset 575 volt., around 1000 hours. Also includes 70' x 24' modular building. Everything is modular and compacts easily for transport. | $75,000.00 |
Ohio |
Circle | 10226 | Sawmill operation: Frick ST36, Edmiston vertical edger with new 20" blades, mandrell and collars, Allen Bradley hydraulic setworks, 3 headblocks, Frick log turner, new mandrell and bearings, saw cab w/controls, three 56" headsaws, 15' carriage, 26' 3-strand log deck with stop & load, 120' sawdust chain, 25' live rolls, 24"x28' belt conveyor 5 HP, 60' 3-strand green chain 5 HP, 50 HP hydrostatic drive, 200 HP on the sawmll. Morbark 58" 6-knife chipper, excellent condition, 150 HP with soft start, 35' vibrating conveyor 10 HP, Fulghum 8x8 screen, 2 Morbark chip loaders 10HP and 30HP. Hosimer debarker with bark drag, 20' 3-strand log deck with stop & load. 20 HP Ingersoll-Rand air compressor with 500 gallon tank. All electrical included. Everything in excellent condition. Producing 10,000 bf daily in grade lumber with 3 operators. | $95,000.00 |
Ohio |
Circle | 12901 | 0 Frick, automatic, right hand, Edmiston setworks, 3 headblocks, air dogs, 10' carriage, 56" headsaw, no power. | $5,000.00 |
Ontario |
Circle | 9965 | ForestAll, right, electric over hydraulic, 4-bunk, 4 tong dogs, tapers, 12' carriage, two 54" headsaws, infeed deck w/stop and load, 30' 4-strand green chain, mechanical tilt hoist, Oliver heavy duty 4"x24" 2-saw edger, 12' x 12' transfer deck, 18" double end trimmer, heavy duty sawdust blower, 275 HP Cummins diesel power. Best offer. |
$35,000.00 |
Ontario |
Circle | 12576 | Complete sawmill operation: 2002 KARA Master with top saw, 16' 3-strand live deck with stop & load, includes 2"x14" 2-saw edger, Oliver pendulum type slab saw, and two 16" trimmers, computer setworks, 5 blades and Simonds 48" insert tooth saw, complete hammering room. Transfers and decking include board return to live conveyor to edger, separate set of cross conveyors, to 3-chain auger to trimmers to piling room, slab saw conveyors include air tipping arms which flip boards to conveyor to slab saw to second conveyor to slab pile. | $95,000.00 US$ |
Oregon |
Circle | 12213 | Complete sawmill operation: Custom built 48" automatic sawmill with 42" headsaw,42" topsaw and 3-saw vertical edger, right hand, all steel, 3-strand live infeed deck with stop & load and forward and reverse, 3-headblocks with air dogs, 14' carriage, metric and standard dial, dual-direction air drums, live outfeed rolls and lumber decks, sawdust chain leads to 25' barn sweep, 3-phase 480 V, most electrical available. Custom built 24" chop saw, air feed, foot petal controls, handles up to 8" cants. 12" x 12" single head band resaw with live feed rollers, air hold downs, no return, 50 HP 3-phase, Morbark hammermill, 16 knives, handles up to 6" material. Complete electrical room with panels, breakers, etc. Click HERE for photos of the sawmill operation. | $30,000.00 |
Pennsylvania |
Circle | 10689 | 2003 36" Montgomery mill, right hand, automatic, all steel, 4 headblocks, 15' carriage, Lane setworks, electric 3-phase log turner. No husk. No blade. No power. Ready to be fitted with band headrig. | $9,000.00 |
Pennsylvania |
Circle | 12548 | Sawmill operation: 01 FRICK, automatic, right hand, all steel, air setworks, 4 headblocks, 3 air dogs, 16' carriage, 54" inserted tooth headsaw, 4 extra 52" headsaws, operator cab, Mellot chain-type log turner, 4-strand infeed deck with stop & load, sawdust blower, 100 HP 3-phase 480V with disconnects, 20' of 2' wide live outfeed belt leads to transfer table to MEADOWS 6"x 36" 3-saw edger with Reckart sawdust blower, 25 HP 3-phase, MORBARK Chip Pak, 100 HP with 2 shaker screens, 25 HP and Cornell sawdust blower, HMC V-206-LPH rosserhead debarker, 3-strand live infeed, outfeed conveyor, handles logs 6" to 36" diameter x 20' length, 3-phase. Also includes over 5000 stickers, Pro-Force air compressor, and various conveyors and decking, SCMI knife grinder with Preset 25 alignment system, SCMI 36" 2-head sander, POWERMATIC 24" single sided planer/surfacer, ROCKWELL 5-head adjustable drill press with 7" stroke, DELTA RT31 tiltable 12" table saw, TAYLOR glue rack, 6 positions, handles material 30" thickness x 16' length, manual tightening. MILLER SRH-444 500 amp arc welder. JOHN DEERE 444C wheel loader with bucket and forks, fair condition, 6965 hours. YALE/EATON TOWMOTOR GC040 series, electric with charger, 4000# capacity. Click HERE for photos of the sawmill operation. | Reduced $60,000.00 |
Pennsylvania |
Circle | 12657 | Complete sawmill operation and resaw line with 20,000 square foot sawmill building: SAWMILL LINE: 1999 HMC V216 rosserhead debarker with deluxe 60"x75" control cab, Slat track, controls, and HMC 55' barn sweep. 1999 HMC LD-30 23' 4-strand log deck with 4-arm stop & loader, hydraulic drive and 15 HP hydraulic power pack. 50' endwise log conveyor with #110 ladder back chain, stop gate, and 4-arm log kicker with electronic sensors. HMC 28' heavy duty 4-strand log deck with 4-arm stop & loader and hydraulic drive. HMC MM10 modular mill with al steel husk frame, offbearing belt, 150HP 460V, 1770 RPM main motor, 60" x 72" control cab, HMC log turner, HMC end-of-the-track carriage drive, four 56" inserted tooth saws, 15' heavy duty slab drop. Mellott 24" x 74' heavy duty rollcase with 8" rolls, stop gate and spiral roll section. TIERNEY Model 648 combination gang edger, split roll infeed, cant positioner, laser lights, dual belt tailing system, 5 HP hydraulic power pack, 75 HP motor with Benshaw soft starter, Mellott 9' 5-strand popup transfer system with #81 chain and drive, Mellott 7' 4-strand transfer with air operated cant stops and drive. MELLOTT 40' 4-strand collector deck with C55 rooftop chain and air operated cant stops. 1999 HMC Model ET10 double end trimmer system. MELLOTT 54' green chain with #188 chain, 25 all steel lumber roll outs, banding cart with banding tools. INGERSOLL RAND SSR-ET50SE screw type air compressor with air drying system and air storage tanks. PRECISION 58" 3-knife ChipPac, 6'x6' screen, collector, dual trailer loading system, 150 HP motor with Benshaw soft starter. CORNELL 30 HP 24" suction blower. CONVEYORS: Webster 18"x60' vibrating conveyor with RENS metal detector, fines section and transistor spout. Webster 18"x50' vibrating conveyor with drive. 17' auger type conveyor with 12" auger. WADKIN #GB9345 5-head moulder. SCMI Model M3 gang rip. WHIRLWIND Model 1000 air operated chop saw, left hand, includes infeed, outfeed and indexing system. POWERMATIC 24" single sided planer. RESAW LINE: 1999 STENNER VQ linebar resaw, turnaround, Silvatech controller, infeed, cant positioner and turner, press roll, 100 HP motor with Benshaw soft starter, 2 hydraulic power packs, RENS LS345 16"x16" metal detector, Mellott 18' and 11' ' 4-strand collector decks, #81 chain, air operated cant stops, and drive, 24"x22' return rollcase with 6" rolls and drive, Mellott 9' 5-strand transfer deck, #81 chain, 5-strand popup system and cant positioner, 30"x26' outfeed with stop gate and cant/board splitter system, Mellott 30" x 24' outfeed rollcase with 8" rolls and drive. NORTHLAND 8,000 board foot (approx.) dry kiln, electric power. BUILDING: 20,00 sq. ft. pre-fab free span sawmill building, 5 roll up doors, debarker and chipper additions, electrical room, air compressor room, Clean Air System burner system with automatic metering system and auger, 1999 Cutler Hammer switchboard, 1200 amp capacity, Cutler Hammer multiple motor control center, main disconnect and 39 starters, 200 amp disconnect, three 100 amp disconnects, Cutler Hammer 25 KVA transformer. ROLLING STOCK: 200 Mack Elite CL713 tri-axle log truck, 460 Mack engine, 8-speed double low transmission, Jake brake, 120E behind-the-cab knuckleboom with telescopic Extend-A-Boom and Rotobec grapple, 358,006 miles. 1998 Freightliner day cab road tractor, Cat 425 engine, 18-speed transmission, Jake brake, wet line kit, 297,463 miles. 1995 Western Star day cab road tractor, rebuilt Cat 425 engine with warranty, 8-speed double low transmission, Jake brake, 249,042 miles. 1999 Ford F250XLT Super Duty 4x4 crew cab pickup, V-8 Triton engine, 118,470 miles. Pitts double bunk log trailer with headboard, center-mounted Prentice 120 knuckleboom, continuous rotation grapple and extended boom, Riley 45' log trailer with 3 sets of log bunks and headboard, 1985 Lowboy with Beaver tail and loading ramps. 1992 Strick 45' chip trailer, two 45' chip vans, 1995 Fruehauf 45' flatbed trailer with strap kit and headboard, Clark GPS15 3000# warehouse forklift, propane, with 4'forks, 1977 Cat 941B crawler loader, Franklin 132 Prehauler with winch, 1998 Cat D5C dozer with new undercarriage , 6-way blade, winch, 4000 hours. Click HERE for photos of the sawmill operation. | $1,800,000.00 |
Pennsylvania |
Circle | 12661 | Sawmill operation: 01 Frick, automatic, right hand, all steel, air setworks, 4 headblocks, 3 air dogs, 16' carriage, 54" inserted tooth headsaw, 4 extra 52" headsaws, operator cab, Mellot chain-type log turner, 4-strand infeed deck with stop & load, sawdust blower, 100 HP 3-phase 480V with disconnects, 20' of 2' wide live outfeed belt leads to transfer table to Meadows 6"x 36" 3-saw edger with Reckart sawdust blower, 25 HP 3-phase, Morbark Chip Pak, 100 HP with 2 shaker screens, 25 HP and Cornell sawdust blower, HMC V-206-LPH rosserhead debarker, 3-strand live infeed, outfeed conveyor, handles logs 6" to 36" diameter x 20' length, 3-phase. Includes Powermatic 24" single sided planer/surfacer, Delta RT31 tiltable 12" table saw, Also includes over 5000 stickers, lumber carts, Pro-Force air compressor, Miller SRH-444 500 amp arc welder, and various conveyors and decking. Click HERE for photos of the sawmill operation. | $49,500.00 |
Pennsylvania |
Circle | 12822 | Complete sawmill: 22' 3-stand log deck with stop & Load, MELLOTT rosserhead debarker with Cornell barnsweep conveyor, 80 KW Onan genset, MELLOTT 22' 4-strand log deck, completely rebuilt with all new components, MELLOTT #5 hydraulic log turner, HYLTON (copy of Edmiston) automatic mill with HMC vertical edger, electric over hydraulic, 45' track, 15' carriage, 4 headblocks, three 56" headsaws, enclosed saw cab, new laser system with 3 lasers for sawmill and edger, new PENDU sawdust blower with 40' of pipe with elbows, 300 HP 60 series DETROIT diesel with 90 KW genset, new MELLOTT vibrating conveyor with electric drive feeds SODERHAMN 48" 6-knife chipper with 24' blower pipe, rebuilt 180 HP MITSUBISHI diesel power unit. Everything in excellent condition. | $160,000.00 |
|
New Listing Pennsylvania |
Circle | 12954 | Circular sawmill, automatic, right hand, all steel, 5 headblocks, 18' carriage opens to 30", 56" headsaw, hydraulic log turner, sawyer cab with 12-volt and hydraulic setworks and other controls, hydraulic pumps, motors and tank, live outfeed conveyor, 5' offbearer belt, sawdust blower, 1000 gallon fuel tank, hydraulic 18" pullout cutoff saw with carbide teeth, 671 Detroit power. | $7,500.00 |
Quebec |
Circle | 9420 | Lane, automatic, 16' right hand carriage with owners manual, 4 double headblocks taper on each, Lane controls, Silvatech setworks (with owners manual), joystick controls, Tyrone Berry feed works, sawyers cab, log turner. Run for 9 years. Excellent condition. | $55,000.00 US$ |
|
Saskatchewan |
Circle | 2918 | Couttes circular sawmill, right hand, 70' track, 12' carriage elec over hydraulic, 3 headblocks, 48" headsaw, Cat D-37F 6 cyl 180 HP diesel, 30 KW 3-phase genset. All electrical included. |
$15,000.00 US$ |
South Carolina |
Circle | 10438 | Complete hardwood sawmill: Fulghum 24' rosserhead debarker. Was running when removed from service. Cutterhead, slide rail and wheels need repair. 3-phase power, #1 Frick, automatic, right hand, all steel, 4 headblocks, air set, 3 air dogs, 20' carriage, Mellott hydraulic log turner, Berry 213 hydraulic carriage drive with drive assembly mounted at rear of sawmill, 52" inserted tooth saw, 3 shoulders missing, 125 HP Westinghouse 3-phase electric motor. Carriage needs some work. Corley 8" x 60" Combination Gang Edger with automatic set, two 125 HP motors. Includes extra saws and spacers. Very good condition. 48" Precision 3-knife chipper, 75 HP 3-phase. Needs some work. Complete set of transfers, decking and sawdust removal. Many extras. Click HERE for more details on the inventory of the complete sawmill operation. | $80,000.00 |
Tennessee |
Circle | 12435 | Corinth, automatic, electric over air, right hand, 36" topsaw with 30 HP motor, 3 headblocks, hammerdog, 1 extra headblock, 14' carriage, operator cab, new control wire from cab to carriage, Tyrone Berry 214 carriage drive 25 HP (needs new cooler radiator), chain type log turner, 56" headsaw, 125 HP motor with soft start (starter needs rewiring), 20' 2-strand log deck with drive and stop & load (includes components to make 3 strand), 20' live off rollers. Ingersol Rand 30 hp air compressor on tank. Disassembled and ready to load. | $25,000.00 |
Texas |
Circle | 7784 | Custom built automatic sawmill, right hand, electric over air, self contained, transportable on tandem dual axle, 3 headblocks, 15 carriage, 56" saw, 30 3-strand log deck mounted on single axle, automatic setworks w/dial control from cab, log turner, 56 headsaw, portable live roller bed w/air-stop and 2-way air-activated kicker arms. Set up for top saw but mandrel not available. Large air compressor. 425 Cat runs the sawmill 27.5KW genset runs electrical. 5-second cycle time on cutting crossties. Will consider trade for a higher production band sawmill. | $80,000.00 |
Virginia |
Circle | 10165 | 2000 Meadows #3 modular mill, 4 headblocks, 4 dogs, Master Dog, 3 tapers, 15' carriage, saw cab, computer setworks, vertical edger, top saw, log turner, 20' 3-strand log deck, 213 Berry feedworks, two 56" headsaws, 100 HP on headsaw, 30 HP on topsaw/vertical edger/carriage feed, Jockey grinder, tooth wrench, extra teeth. 20' roll case with slab drop. 9'4-stand transfer deck w/#78 rooftop chain. Corinth 24" double end trim saw, 16' length. 27' Morbark vibrating conveyor. 400 KW Spectrum Detroit Diesel genset, 6000 hours. Includes all electrical and starters. Producing 8,000 to 9,000 daily. | $111,500.00 |
Washington |
Circle | 9069 | Automatic circular sawmill, right hand, 3 headblocks, 18' Salem carriage, Salem carriage drive, 60' track, steel husk, saw cab, two 52" headsaws, 36" topsaw, 20' infeed deck w/stop & load, 30' live rollers, two 20' conveyors. In process of original build. Still needs setworks and mill has not been wired yet. No power. | $10,500.00 |
West Virginia |
Circle | 11708 | HMC MM10 modular mill, right hand, 15' carriage, 3 headblocks, air dogs need some work, control cab with SilvaTech setworks, offbearer belt, 56" headsaw, HMC all steel overhead husk frame with 30 HP 3-phase motor, 50 HP hydraulic carriage drive with controls, Mellott log turner. | $20,000.00 |
| Wisconsin | Circle | 3327 | Wendt circular sawmill, mid 90s. electric over hydraulic, 4 presets, dual controls, 48" headsaw, clearance for 56" saw, 4 headblocks-3 live, 31" opening, 12' carriage, 44' track, live deck w/stop&load, chain type log turner, sawdust chain, no power. Sawed less than 10,000 ft. Always under cover. |
$25,900.00 |
Wisconsin |
Circle | 8669 | Jackson Big Jack, left hand, complete, electric over hydraulic, 125 HP 3-phase, includes all electrical with boxes, 3 headblocks, 14' carriage, sawyer's cab on husk, two 56" headsaws, hydraulic log deck, 100 gal. hydraulic tank w/25 HP motor, 30' live outfeed conveyor, 7'x17' lumber deck. | $24,500.00 |
Wisconsin |
Circle | 10448 | Meadows #1, left hand, all steel, custom built automatic, 4 headblocks, 2 hydraulic dogs, 12' length, 50" and 48" inserted tooth saws, 100 HP 3-phase. Meadows 4" x 32" 3-saw edger, 15 HP 3-phase. Valby 3-knife chipper, extra set of knives and extension discharge pipe, 60 HP 3-phase, Hi-Lo voltage starter. Maybe 100 hours. Only chipped enough to fill 3 semiloads. Custom built guillotine slab cutter, scissor cutters buck slabs to 6" to 2' length. Used for stove wood, firewood starter, etc. 30' sawdust auger, 11" traugh, 5 HP 3-phase motor. Everything was running fine when removed from service. | $12,500.00 |
All information as to age and condition of these used sawmills listed by Sawmill Exchange is supplied by the sawmill owners. No warranty is either expressed or implied by Sawmill Exchange.
All equipment listed above is for sale by private owners. If you are interested in talking with any of the owners about their equipment for sale, please contact us at: U.S. Toll Free: 800-459-2148 / Local: 205-969-0007
Links to Equipment for Sale Pages
Manual Feed Band Sawmills
Automatic Feed Band Sawmills
Hydraulic Band Sawmills
Higher Production Band Sawmills
1-2 Man Circular Sawmills
Handset Circular Sawmills
Auto/Semiauto Circular Sawmills
Support Equipment
Complete Sawmill
Operations
Auxiliary Equipment
Industrial Equipment
