SAWMILL EXCHANGE

COMPLETE SAWMILL OPERATIONS FOR SALE
(as of Wednesday May 14, 2008)

Complete Sawmill Operations For Sale:

Alabama - Dimension Mill (Ad #7799)
Ad #7799: Dimension mill: Esterer sash gang, Miner 4"x32" 3-saw edger, Morbark rosserhead debarker, Bush chipper w/shaker and vibrating conveyor, 20' end trim, Windham 12000# forklift, 70' 3-strand green chain, 100' bark conveyor, infeed & outfeed rolls. Electric power on edger. Detroit runs everything else. 10-12 man operation......$120,000.00 - Click here for more details

Arkansas - Sawmill (Ad #10783)
Ad #10783: Corley tie mill, handset, right hand, all steel, 2 headblocks, 10' carriage, 52" headsaw, Mellott hydraulic log turner, 10" sawdust blower, 30' live outfeed, three 10' sections of rollers on metal stands, Arsaw grinder, Miner 3-saw 4" x 32" edger, produces up to 26" boards, 671 Detroit, PowerLift 12,000# all terrain forklift, 4' heavy duty forks, 1 Ram needs a pack, 920 Cat loader, 1990 648D John Deere grapple skidder, 440B John Deere cable skidder, GMC log truck, 1/2" banding tools. Everything well maintained. Can demonstrate any of the equipment......$70,000.00 US$ - Click here for more details

British Columbia - Sawmill (Ad #8047)
Ad #8047: Sawmill operation: Live infeed with transfers to E. Povlsen 5" high production double cut bandmill, fully hydraulic, 50 HP electric, computer setworks, extra log turner, log kickers, and levelling dogs, extra 5" bands, sawdust blower w/cyclone, steel walkway and substructure. Live outfeed conveyors to 3-saw 6" bull edger w/edge guide and air assist, live infeed and outfeed rolls, tilt table, roll case. Outfeed deck to 16" hula double end trimsaw w/roll case and air kickers, drop conveyor. 5 strand 45' rollertop green chain with rolls....$95,000.00 - Click here for more details

Connecticut - Remaining components of sawmill (Ad #8932)
Ad #8932: Chase, right hand, handset, Glover friction feed, 20' 3-strand live log deck w/stop & load, 3 headblocks, 16' carriage, hydraulic dogs & tapers, power receder, chain log turner. 100 HP. Sweep table for boards and slabs. Includes Clark & Allis Chalmers forklifts, steel lathe, 5 extra saws, 3 50HP motors, blowers & piping, grinder, more. Running fine when removed from service.....$28,000.00 - Click here for more details

Florida - Remaining components of sawmill operation - Click here for more details

Illinois - Sawmill Operation(Ad #11480)
Ad #11480: Sawmill operation: 1999 Wood-Mizer LT40HDE25 Super Hydraulic, 25 HP 3 phase electric, remote operator station with computer setworks, debarker, auto clutch, Wood-Mizer automatic sharpener with manual setter, 60 extra bands, 4600 hours. Includes 40 HP rotary phase converter with soft start switch. 13' 3-strand log deck, possibly manufactured Helle, 2 HP 3-phase power with gear reduction. Marathon 24S 2" x 24" 2-blade edger, choice of either 18 HP Briggs & Stratton gas engine or 10 HP 3-phase power unit. Includes 5 extra sets of narrow kerf split blades. 1996 Waldon 5100 articulated wheel loader with ROPS, quick attach, bucket and forks. 4 lumber carts. Banding machine with banding material, seals and crimpers.....$35,500.00 Click here for photos

Indiana - Remaining components of sawmill (Ad #10380)
Ad #10380: Remaining components of complete sawmill operation: Custom built high production grade single head band resaw with complete runaround, Olathe Model 867 tub grinder, Becker-Underwood coloring system, Black Clawson-Sumner shaker screen, 4-strand 30' green chain, custom built 8" x 20" hog, Powermatic table saw. $130,000.00 if parted out.....$120,000.00 - Click here for more details

Kentucky - Sawmill Operation (Ad #11245)

Ad #11245: Sawmill operation: 2000 Woodland K-6 with 7"x 30" 3-saw edger, fully hydraulic, 4" bands, computer setworks, debarker, 40 HP 3-phase on the mill, 75 HP 3-phase runs edger and auxillary hydraulics that power the live infeed deck and live outfeed rolls. Producing 75 to 100 7x9 crossties per day. Fastline Gator 204 16x16 grade resaw with heavy built customized complete runaround and greenchain, 40 HP 3-phase, runs resaw, 30 HP and 5 HP power packs run hydraulics on the runaround and greenchain, runs 1 1/2" bands. Includes Yamani wide band sharpener and Woodland narrow band sharpener. Electrical powered by 671 Detroit genset with 2650 hours.....$85,000.00 Click here for photos

Michigan - Remaining components of Sawmill (Ad #9670)
Ad #9670: Remaining components of complete sawmill operation: Fulghum rosserhead debarker, log turner, air kicker, live outfeed conveyors, stop & load. 48" Fulghum 6-knife chipper, Hanchett knife grinder, includes CM&E Roto Kleen chip screen and conveyor. $30,000 worth of electrical. Two 100KW Cummins diesel gensets. Roll case, lumber carts, feed rolls, 700' of chain. Asking $61,500 if parted out. Will sell complete package for $30,000.00 - Click here for more details

Michigan - Remaining components of Sawmill and Cutstock Operation (Ad #9560)
Ad #9560: Remaining components of sawmill and cutstock operation: Cutstock operation: Complete Pendu cut-up line w/unscrambler, cutoff saw, cant sizer, gang saw. Sawmill operation: Renco 52" circular sawmill, barn sweep. Other equipment: Oliver 8" x 24" single sided planer, Allis Chalmers 6000# LP forklift, Bronco pallet stacker, Ingersoll-Rand air compressor, 1986 GMC dump truck/flat bed. $49,750 if parted out.....$39,500.00 - Click here for more details

Michigan - Log Home Manufacturing Operation (Ad #10966)

Ad #10966: Log home manufacturing operation: 1999 Pendu Saw System M 4300, 8" capacity, double arbor with cant sizer, complete with cutters and spacers to make log home logs. Also includes blowers and 15' of infeed and outfeed rollers. 3-phase power. Operated about 520 hours per year. Was running fine when removed from service. 1979 Pendu Saw System 4000, 6" capacity. 3-phase power. Needs some work. Yates-American A-62 6" x 15" 4-sided planer/matcher, 8-knife top and bottom heads, belt drive, 100 HP 3-phase with Benshaw soft start. 1998 Ligna Machinery sharp chain scragg, 4" x 12" capacity, 12' length, 48" inserted tooth blades, 3-phase power. Morbark Model 636 debarker, built for high speed production, have debarked 3000 6" to 12" red pine logs per 10-hour shift. Custom built trim saw with pop-up arbors set at 0, 6', 8', 10', and 12'. Morbark 10' vibrating conveyor, 16" pan width. Morbark 25' vibrating conveyor, 22" pan width. $145,000.00 if parted out.....$114,000.00 - Click here for more details

Michigan - Sawmill Operation (Ad #11333)

Ad #11333: 1999 Meadows #3 Deluxe fully hydraulic automatic sawmill. 4HB 16' carriage. Edmiston 2 saw vertical edger (hydraulic driven off mandrel). 4' x 5' deluxe cab. Meadows computer setworks. 40' 3 strand green chain. 32' 2 strand log deck with stop and load. Renco chain type log turner. (2) 56" f style saws (1 is new). 4 laser lights. 400 Cummins with 10 speed transmission direct drive power unit. Live offbearer. Phelps blower. Will be running until sold. Excellent condition.....$90,000.00 Click here for photos

Michigan - Cutstock Operation (Ad #11181)

Cutstock operation producing 10,000 to 14,000 pieces daily: Smith 12"x 8" 2-head band resaw with nearly new complete hydraulic runarund, setup for either lineshaft or electric power, 2006 custom built 24" cutoff saw with 20 HP Honda gas engine, extra 24" blade. 610 Brewco vertical sizer with lineshaft and hydraulic power. Linde 6000 lb. forklift with hydrostatic drive. Double head notcher. 85 HP John Deere diesel engine, 1200 hours on complete overhaul. For pallet production, includes Bronco nailer with stacker, very low hours.....$48,500.00 Click here for photos

Missouri - Sawmill Operation (Ad #11366)

Ad #11366: Completely automated one to two man sawmill operation: 2004 Baker Model 36-30 with Miner 4"x32" 2-saw edger, 30 HP 3-phase motor powers the mill, Baker hydraulic pack powers the sawmill feed and live infeed deck, 30 HP on the edger.  Sawmill is custom designed for sawing from 6' length to ties and up to 24' length, fully hydraulic, two hydraulic log turners 3 hydraulic log clamps, 3-strand live deck with stop & load, 3-strand 20' accumulating deck. Two outfeed directions for processed products: Ties are kicked over the right-hand side of the sawmill to a 3-strand outfeed conveyor and then to 25-tie stacker, All other products are transferred by the board drag back to dead rolls, 4x4's to the left to a 4x4 stack rack, slabs to the right to a slab rack with banding materials, lumber straight to the edger and then to Baker speedup/transfer deck, then to 3-strand 15' green chain....$35,000.00 Click here for breakdown of equipment

New Mexico - Planing/Moulding Operation (Ad #10273)
Ad #10273: Complete moulding and planing operation: This operation was producing specialty products for a number of national distributors of wooden toys, art equipment, other specialized distributors and includes knives to produce a complete line of end products for home construction and remodeling applications. The equipment inventory includes Tri State gang rip, Yates 54" single head band resaw, Zinicker 20" wide gang rip saw, Diehl 5-head 4"x6" moulder, Glover dowel machine, Vonnegut 6" x 8" 6-head moulder, XL 2" x 4" 4-head moulder, Ruvo double mitering machine, Woods Model 404 8" x 19" 5-head planer, 4-place knife grinder, 2-place knife grinder, Electric set up stand, Planer knife grinder, 6 chop saws, Trim tables and sorting tables, Filing Room, $50,000.00 in moulder and planer knives....$75,000.00 - Click here for more details

North Carolina - Sawmill (Ad #9702)
Ad #9702: Complete sawmill, electric over hydraulic, automatic, right hand, Edmiston setworks, feed, 18' carriage, 4 Meadows headblocks, saw cab, 52" headsaw, Edmiston 18' log deck w/stop&load, Kickers, V216H HMC debarker, 8"x54" HMC combination gang edger, 3 sets of saws, 300 HP, crossover & 1 tailing device, Edmiston 4"x36" 2-saw edger, 48" Fulghum 6-knife chipper w/Webster vibrating conveyor, 40' & 20" 3-strand green chain, 60' roll case, slab belt & drop. Includes all electrical, starters & disconnects....$65,000.00 - Click here for more details

Ohio - Sawmill (Ad #10226)
Ad #10226: Sawmill operation producing 10,000 bf daily in grade lumber with 3 operators. Frick ST36, Edmiston vertical edger with new 20" blades, mandrell and collars, Allen Bradley hydraulic setworks, 3 headblocks, Frick log turner, new mandrell and bearings, saw cab w/controls, three 56" headsaws, 15' carriage, 26' 3-strand log deck with stop & load, 120' sawdust chain, 25' live rolls, 24"x28' belt conveyor 5 HP, 60' 3-strand green chain 5 HP, 50 HP hydrostatic drive, 200 HP on the sawmll. Morbark 58" 6-knife chipper, excellent condition, 150 HP with soft start, 35' vibrating conveyor 10 HP, Fulghum 8x8 screen, 2 Morbark chip loaders 10HP and 30HP. Hosimer debarker with bark drag, 20' 3-strand log deck with stop & load. 20 HP Ingersoll-Rand air compressor with 500 gallon tank. All electrical included. Everything in excellent condition....$100,000.00 - Click here for more details

Ontario - Sawmill (Ad #10127)
Ad #10127: Complete sawmill operation, Producing 15,000 to 20,000 bf per shift: 2002 Precision Model P-742-H 42" rosserhead debarker. 2002 Frick: O1C-36TD Timber Tiger, air over hydraulic. 2006 4 strand 2-tier collector deck. Three way sorting roll case. Brewco 16"x16" Big Band B1620 single head band resaw, complete runaround. Reckart Model 421 combination gang edger. Two 22" trim saws, capable of trimming 7"x9" ties. 48" Precision 3-knife Chip Pack. 52’ vibrating conveyor. 80’ x 11’ grading chain. Brewco Lowride 4-strand descrambler. 23 lumber carts. 2002 Cummins 350 kw Generator. Complete with transfers and infeed/outfeed decking. Also includes air compressor, 22" trim saw, 16" slab saw, vertical edger, grinders, 48’ dry van filled with miscellaneous parts and supplies.....$300,000.00 - Click here for more details

Pennsylvania - Sawmill (Ad #11576)
Ad #11576: Sawmill operation: Montgomery, automatic, right hand, all steel, completely hydraulic, saw cab, 4-headblocks, 13' carriage, 56" and 52" inserted tooth saws. No power. Cornell 6"x42" combination gang edger, nearly new split rolls, live outfeed, board saw has one stationary and two movable saws with hydraulic power and air over electric lift rolls, gang saw set up with spacers. No power. Precision 48" 6-knife chipper, completely rebuilt in 2005, horizontal feed, top discharge. No power. 1988 Lift King Model LK-10R3 wheel loader, 10,000 lb. capacity, operator cab tilts to accommodate for operations on a slope, 120" lift height, 60" forks opening, excellent condition. 4-cylinder Cummins diesel power, Steers sideways or front-only or back-only or on its own axis. Can pick up two bundles (50 railroad ties) in one pass. Two 20' sections of 8" live rolls, hydraulic drive. Power not included. 25' 3-strand live log deck with stop & load. Reckart hydraulic chain-type log turner. Bought new. Only used two years. No power. $73,500.00 if parted out.....$70,000.00 Click here for more details

South Carolina - Sawmill (Ad #10438)
Ad #10438: Complete hardwood sawmill: Fulghum 24' rosserhead debarker with live deck and bark conveyor, #1 Frick, automatic, right hand, all steel, 4 headblocks, air set, 3 air dogs, 20' carriage, Mellott hydraulic log turner, Berry 213 hydraulic carriage drive with drive assembly mounted at rear of sawmill, 52" inserted tooth saw, 3 shoulders missing, 125 HP Westinghouse 3-phase electric motor. Carriage needs some work. Includes 21' 3-strand live deck, 26" sawdust blower, sawdust conveyor, slab belt. Corley 8" x 60" Combination Gang Edger with automatic set, two 125 HP motors. Includes extra saws and spacers. Very good condition. Includes jump chain to edger, 12" infeed rolls, 60" 9' outfeed tailing belt conveyor, 3-strand 9' rooftop chain to trimmer, 19' deadroll conveyor to resaw, 30' slab conveyor, sawdust conveyor. Newman 2-saw trimmer, 16' length, push button set, movable, includes two saws with some teeth missing. Needs some work. Includes 3-strand 45' separation deck/green chain from trimmer to green chain, 25' block conveyor, sawdust conveyor. 48" Precision 3-knife chipper, 75 HP 3-phase. Needs some work. Includes 5' screen and Phelps loading system.  All electrical, starters, cables included. Complete set of transfers, decking and sawdust removal. Many extras.....$80,000.00 - Click here for more details

South Carolina - Sawmill (Ad #11616)
Complete Sawmill Operation: Whelan upright 6' band headrig with 48" Salem automatic carriage, 13 extra 8" bands, reversible for either right hand or left hand, 4 headblocks with dogs, 14' carriage, Salem setworks, Tyrone Berry 280C hydraulic shotgun carriage drive with 150 HP motor, operator cab, Salem bar-type log turner, pump, tank and controls. Includes filing room with Hanchett 414 left hand band sharpener with clamps and stand. Hanchett 82 stretcher roll with work table, welding clamp, support equipment. Newman G240 knife grinder. Brewster 8" x 60" 5-saw gang edger with infeed, 250 HP 3-phase, 480 volt Corley 8"x48" combination gang edger, rebuilt, 10' infeed with movable fence, Ligna setworks, laser light, air lift rolls, cant transfers and positioner, 24"x18' dual tailing system, 30 extra saws, 250 HP motor with controls, hydraulic power pack. 16" drop saw multi-trimmer with live infeed and outfeed rolls with presets. Trims up to 8" material. Fulghum E1020 rosserhead debarker, 40 HP 3-phase with controls and hydraulic power pack. Works best with logs up to 16' length and up to at least 36" diameter. Yates American A62 flat belt 4-sided square head planer, Woods pineapple feed table, 75 HP 60" suction blower with 200' of pipe, 125 HP 3-phase power. A lot of wear. Fulghum 60" 6-knife ChipPak, horizontal feed, top discharge, Polytech 6'x6' screen and cyclone, 250 HP 3-phase motor. Hammer hog, drop feed, bottom discharge, 24" x 24" opening, 100 HP 3-phase motor with controls. Rolling stock includes 1995 Cat 950F articulating wheel loader with log forks and clamp, enclosed cab, Cat 950 articulating wheel loader with bucket, enclosed cab, Taylor 20,000 lb. Big Wheel forklift with side shift, extends to 12' width, Detroit diesel engine, 8' forks, extra fork attachment, Taylor 20,000 lb. Dual Wheel forklift, 8' forks, Detroit diesel power. Running condition, Hyster 20,000 lb. Dual Wheel forklift with forks, Perkins diesel engine. Includes the complete setup (with extras) of transfers, decking, rollers, green chain, sawdust chain. Also includes all electrical, welding equipment, air compressor, and many extra parts and components.....$130,000.00 Click Here for more details

Tennessee - Sawmill (Ad #10543)
Ad #10543: 22' 3-strand log deck w/hydraulic drive and stop & load, Morbark 636 rosserhead debarker with cab and live infeed and outfeed log troughs, 30' log deck to sawmill with stop & load, Edmiston right hand, electric over hydraulic, 4-headblock, 14' carriage, 52" and 54" headsaws, 100 HP 3-phase, 2-saw 3.5" x 24" Miner edger w/laser lights, 30 HP 3-phase, 24" x 40' slab belt, 48" 6-knife Fulghum chipper, 125 HP 3-phase, 45' chip trailer, 150 KW genset under 100 hours on new rewind, electrical, starters and disconnects, 6500 Massey-Ferguson 8000# forklift, 50 HP air compressor. Everything on steel and under shed....$55,000.00 - Click here for more details

Tennessee - Sawmill (Ad #10878)
Ad #10878: Complete sawmill operation: 2003 Baker 36-30E, 30 HP 3-phase 220V, 16' cut, computer setworks, sawdust blower, Baker semiautomatic blade sharpener, 20' 2-strand log deck with stop & load, 7.5 HP. 30' outfeed rollcase with right and left lumber kickers, custom built 4" x 30" 5-blade gang edger. 20' 2-strand lumber deck. 22" chop saw, drop down, 10' infeed rollers, 8' outfeed rollers, 10 HP single phase power. 2001 Baker PAQ 6" x 12" single head band resaw with return. 15 HP 3-phase, air kicker, 4" sawdust blower, 3208 Cat diesel power. Michigan 55B wheel loader, bucket and pallet forks, two nearly new tires. Running daily.....$42,500.00  - Click here for photos

Virginia - Sawmill (Ad #9590)
Ad #9590: 01 Frick, automatic, right hand, air over hydraulic, hydraulic log turner, 58" headsaw, 150 HP 3-phase, 2"x16" 2-saw edger, Mellott rosserhead debarker, 36" cutoff saw. 48" Precision ChipPac with vibrating conveyor, double Y exit for loading two trailers at once, 100 HP 3-phase. Includes live green chain, air compressor, phase converter, electrical and starters. Completely automated. No manual log or board handling needed until the end of the line. Over $175,000.00 invested....$55,000.00 - Click here for more details

Complete Industrial Operations For Sale:

Arkansas - Gravel Washing Plant (Ad #9634)
Ad #9634: Complete self-contained gravel washing plant: Tyler-Niagara 4x10 gravel shaker with Kolburg Classifier 24' sand screw, fed by 4' x 8' hopper with vibrator and 95' conveyor. Includes 6" waterpump, two 2" primer pumps, twin feed air compressor, 90 kW generator and all electrical breakers, switches, controls. Everything running and in good condition. Requires water source. If not too far, can assist with moving and setup in your location.....$100,000.00 Click here for more details

Links to Equipment for Sale Pages
Manual Feed Band Sawmills    Automatic Feed Band Sawmills    Hydraulic Band Sawmills   
Higher Production Band Sawmills    1-2 Man Circular Sawmills    Handset Circular Sawmills   
Auto/Semiauto Circular Sawmills            Support Equipment
Complete Sawmill Operations      Auxiliary Equipment    Industrial Equipment