Toll Free 800-459-2148 Local 205-969-0007
Links to Equipment for Sale Pages
Manual Feed Band Sawmills Automatic Feed Band Sawmills Hydraulic Band Sawmills
Higher Production Band Sawmills 1-2 Man Circular Sawmills Handset Circular Sawmills
Auto/Semiauto Circular Sawmills Support Equipment
Complete Operations For Sale Auxiliary Equipment Industrial Equipment
Click on the equipment category you are interested in to see the ads (or, just scroll down the page)
|
BANDING/STRAPPING BLADES - Bands - Saws COMPONENTS - Air Compressors - Attachments - Extensions |
- Feedworks - Lasers - Log Turners - Miscellaneous - Topsaw DECKING & TRANSFERS - Conveyors - Descramblers - Greenchain |
- Log Decks - Roller Beds - Slab Decks/Racks - Sorting Table - Stacking Decks - Sweep Table - Transfer Decks FORESTRY WINCH |
LUMBER CARTS |
SAWDUST
REMOVAL SHAPERS SHARPENERS SPECIALTY SAWS - Lath Mill - Panel Saws - Radial Arm Saws - Routers - Table Saws |
This page includes the auxiliary equipment of complete operations for sale through Sawmill Exchange.
All equipment listed is privately owned. We do not represent any manufacturers or dealers. If you are interested in talking with any of the owners about their equipment for sale, please contact us at: US/Canada Toll Free: 800-459-2148 or Local: 1-205-969-0007.
All prices in U.S. $
| State/ Province |
Mill Type |
Ad # |
Auxiliary Equipment |
Price (U.S.$) |
| Air Compressors | ||||
| Kentucky | Air Compressor | 9372 | Three air compressors, 3-phase power, older models but run fine. Will separately for $500.00 each. | $1,250.00 |
Michigan |
Air Compressor | 12123 | Quincy 25 HP air compressor, 3-phase, water cooled. No tank. | $500.00 |
Michigan |
Air Compressor | 12149 | Hydrovane 218 fin air compressor, 50 HP 440 | $2,000.00 |
West Virginia |
Air Compressor | 11709 | Emglo Model T 25HP tank-mounted air compressor | $2,000.00 |
| Attachments | ||||
| Mississippi | Attachments | 10415 | Cat 8 ft. wide (2 1/2 yard) bucket for quick couple. Probably works best with 918 or 924 series. | $3,500.00 |
| Bands | ||||
Arkansas |
Bands | 11307 | International Knife & Saw wide bands, two new 10" x 32'5", 15-gauge, 1 3/4" tooth spacing, and three 11" x 47', 1 3/4" tooth spacing | $2,100.00 |
| Banding/Strapping Equipment | ||||
Colorado |
Banding/ Strapping | 11528 | Strapping tools: tightener and crimper/cutter with reel of 3/4" strapping | $750.00 |
Georgia |
Plastic Film Wrapping | 12321 | 2007 Robopac Start Maxi plastic film wrapping machine, 59" turntable rotates 10 times per minute, front and rear forklift opening, single phase 220V with soft start. Extras include automated wrap cycle with laser eye for 1, 2 or 3 wraps and adjustable brake tensioner. Currently in use wrapping 800 pallets of finished wood products per shift. | $2,750.00 |
| Michigan | Banding/ Strapping | 10340 | Two Signode AMP Model 1-34 banding tools for 3/4" steel banding, air operated. One rebuilt and not used since. Selling for $1,000.00 .One leaks some air. | $750.00 |
|
New Listing New Jersey |
Banding/ Strapping | 12941 | 1/2" strapping kit with 1 roll steel banding, tightener and crimper/cutter. | $500.00 |
North Carolina |
Stretch Wrapper | 12622 | 1996 Lantech Lan-ringer stretch wrapping machine, 75" ring, 48" conveyor, Allen Bradley 1305 PLC controls, 230/460 dual 3-phase motors. Not just excellent, but pristine condition. Over $150,000.00 new. | $69,000.00 |
| Chip Vans | ||||
| South Carolina | Chip Van | 10440 | 1999 ITE chip van, similar to Peerless, open top, new tires, around 42' length. | $18,000.00 |
| Conveyors | ||||
| Alabama | Conveyor | 9873 | 100' bark conveyor with trough, 5 HP 3-phase power. | $7,500.00 |
Michigan |
Conveyor | 11174 | Two 32" x 15' belt slab conveyors with gear boxes and approximately 70' of extra belting. Both conveyors and belting are nearly brand new. | $1,100.00 |
Missouri |
Conveyor | 12097 | 14' of 30" conveyor with side roller and gear box. No power. Best offer. | $2,500.00 |
Oregon |
Conveyor | 11447 | 24"x65' belt conveyor with catwalk, 15 hp 3-phase motor and gear box on S-drive | $2,500.00 |
Vermont |
Conveyor | 12345 | 130’ of 18" live belt, 16’ sections, 5" sides, 5 HP 3-phase electric, 12 yrs old, under 5000 light duty hours, using for wood waste in working operation. | $3,500.00 |
| Descramblers | ||||
| None currently available. | ||||
| Electrical | ||||
Arkansas |
Phase Converter | 12605 | Rotary 3-phase converter, 60 HP motor, includes starter boxes. | $3,000.00 |
| Georgia | Phase Converter | 10134 | Rotary 3-phase converter 480 volts, 124 amps, 100 HP. Integrated starter box. Includes transformer, safety cutoff panel and meter base. $16,600.00 new cost w/extras. | $7,500.00 |
Oregon |
Transformer | 11450 | Weaver Electric 50 KVA dry transformer, 240/460 3-phase. | $500.00 |
Wisconsin |
Phase Converter | 12645 | Phase converter with step up transformer to 440/480. Will run up to four 25 HP or smaller motors. Offers considered. | $1,500.00 |
| Extensions | ||||
Illinois |
Extension | 12466 | 1998 24' track extension for Wood-Mizer LT40HD series | $2,500.00 |
Washington |
Extension | 12799 | 24' track extension for a 2005 Wood-Mizer LT40 Super Hydraulic | $2,500.00 |
Wisconsin |
Extension | 12644 | 1988 Wood-Mizer 12' track extension. Will work on 1986 to 1991 LT30 and LT40 series mills. | $1,000.00 |
| Feedworks | ||||
| None currently available. | ||||
| Forestry Winches | ||||
| South Carolina | Winch | 10441 | Carco/Paccar G80 hydraulic winch, 1" cable, can fit on D-7 or D-8 Cat, more. Over $50,000 new. | $12,000.00 |
| Forklifts | ||||
| British Columbia | Forklift | 9595 | Komatsu 8000# forklift with new front tires and battery. Manual steering. Includes all components for power steering. Only 10 hours since tune up. Not pretty but runs good. | $5,500.00 |
| Connecticut | Forklift | 8998 | Clark-Ross 16000# rough terrain forklift, 24' lift capacity, dual front wheels, wider back steering wheels, 6 cylinder Continental gas engine, 4 speed transmission. Needs some work, but basically in good shape | $8,500.00 |
Georgia |
Forklift | 12505 | 1978 Nasco 8000# all terrain forklift, gas power, 12' lift height. Capable of loading a bundle of crossties. | Reduced $2,500.00 |
| Illinois | Forklift | 9743 | Hyster 6000# electric forklift with charger, 3-stage mast. Now includes reconditioned battery and new hydraulic seals. | $3,000.00 |
Iowa |
Forklift | 12157 | 1987 Toyota 5000# propane forklift with side shift, solid tires, new engine, new radiator, new battery, new seat. | $6,000.00 |
| Kentucky | Forklift | 8424 | 1991 Nissan pneumatic forklift, propane power, 2-stage, 3000 lb. capacity | $4,600.00 |
|
New Listing Maine |
Forklift | 12945 | 2005 JCB 520-40 telescopic loader/lift with brush forks with grapples, 96" bucket, and McMillan 24" auger, 4x4, 4-wheel steer, Perkins 50 HP diesel engine, auxiliary plumbing, open cab with guard, 4200 lb lift capacity at 13'2" full lift height. | $45,000.00 |
Michigan |
Forklift | 11562 | 1997 Toyota 9,000 lb. forklift, triple-stage mast, cushion rubber tires, 10,000 hours. Good running condition. | $14,000.00 |
Michigan |
Forklift | 12520 | Clark CY80 8,000lb two stage forklift. 12ft+ of lift. Everything works good but Continental engine needs to be overhauled. Asking $3,500.00 as is or $5,500.00 after we overhaul it. Running daily. | $3,500.00 |
Missouri |
Forklift | 12829 | Powerlift 8,000 lb forklift with side shift, raise and tilt. Can demonstrate. | $6,000.00 |
|
New Listing New Jersey |
Forklift | 12943 | 1966 Massey-Ferguson 2200 gas powered forklift, 25' lift, 5000 lb. capacity. Runs good. | $4,000.00 |
| New York | Forklift | 10393 | Cat DPL40 diesel forklift, 9000# capacity, dual drive, 6' wide carriage, 5' forks, 2-stage mast. Good condition. | $14,500.00 |
Ohio |
Forklift | 12641 | 2000 Linde H40D 8000# forklift, Perkins diesel power, dual drive tires, side shift, 3-stage mast, 94"/180". Looks and runs great. | $14,500.00 |
Pennsylvania |
Forklift | 11641 | 1988 K-D Manitou 8000 lb. forklift, fair condition. | $8,000.00 |
Pennsylvania |
Forklift | 11642 | 1997 Viking 800 lb. forklift, large back tires. $40,000.00 new. | $15,000.00 |
Pennsylvania |
Forklift | 12670 | Yale/Eaton Towmotor GC040 series, electric with charger, 4000# capacity | $3,000.00 |
Pennsylvania |
Forklift | 12824 | Otis 4000# all terrain forklift with mast, 16.5" wheels, Continental 6'cylinder gas engine. | $2,500.00 |
Tennessee |
Forklift | 12133 | 1969 Pettibone OS-3354-1, 6000 lb. lift, 4' log forks, 8' side shift, Detroit motor | $3,500.00 |
| Green Chain | ||||
| Alabama | Green Chain | 9872 | 70' 3-strand green chain, 5 HP 3-phase power. | $7,500.00 |
| Indiana | Green Chain | 10379 | 4-strand 30' green chain, 3-phase power | $3,500.00 |
Indiana |
Green chain | 12407 | Meadows 3-strand green chain, 9' x 30', rooftop chain, 3-phase electric drive | $4,250.00 |
Iowa |
Green Chain | 11901 | 4' strand 9' x 9' green chain, some M500 rooftop chain but not complete, 3-phase power. | $900.00 |
Michigan |
Green Chain | 12521 | 7'x40' 3-strand green chain, hydraulic drive. Built 2 yrs ago but never used. Always stored inside. | $6,000.00 |
|
New Listing Missouri |
Green Chain | 12927 | Baker 30' 2-strand green chain, additional 14' 2-strand green chain, both with motors and hoses. | $2,200.00 |
| Virginia | Green Chain | 10053 | 30' green chain in 10' sections for easy transport. Single phase power. | $3,000.00 |
| Lasers | ||||
| Indiana | Lasers | 10732 | Set of two ForestLine lasers, red color, 12-volt power, various hookups, converter boxes included. | $1,000.00 |
| Lath Mill | ||||
| None currently available | ||||
| Log Decks | ||||
Missouri |
Log Deck | 11368 | Portable 15' 2-strand live deck with stop & load on single axle, 2" ball hitch, hydraulic motor included. | $4,500.00 |
Missouri |
Log Deck | 12569 | 24' 2-strand live deck, choice of either electric or hydraulic feed, hydraulic stop & load. |
Reduced $3,500.00 |
North Carolina |
Cant Deck | 11959 | 16' 3-strand live cant deck, 10 stops | $1,000.00 |
| Log Turners | ||||
|
New Listing Illinois |
Log Turner | 12971 | Mellott #5 hydraulic chain type log turner. No power. | $1,750.00 |
Kentucky |
Log Turner | 12585 | Mellott #5 chain type log turner, includes hydraulic power pack with 10 gallon tank | $2,500.00 |
| New York | Log Turner | 8954 | Corley 42" Bar Turner, brand new | $11,000.00 |
|
New Listing Ohio |
Log Turner | 12926 | Mellott 5100 hydraulic log turner, very good condition | $5,500.00 |
| Lumber Carts | ||||
| Virginia | Lumber Carts | 12319 | Five lumber carts, all steel, 42" x 96", each with solid rubber wheels. $390.00 each. | $1,950.00 |
| Panel Saws | ||||
| None currently available. | ||||
| Power Units and Gensets | ||||
Connecticut |
Power Unit | 12162 | 85 KW Mitsubishi genset, 100 gal fuel tank. | $7,500.00 |
Georgia |
Power Unit | 11234 | 371 Detroit diesel engine. Needs some work. | $1,500.00 |
Illinois |
Power Unit | 12608 | 1973 Detroit 671 with Rockford clutch, starts good, runs good, uses a little oil. | $3,000.00 |
Indiana |
Power Unit | 11728 | D-318 Cat power unit with gas pony motor and clutch. Overhauled in 2002. Runs fine. Fuel efficient. Always under cover. | $3,500.00 |
Indiana |
Power Unit | 11885 | International DT360 power unit on skids with double disc clutch. Excellent condition. | $4,500.00 |
Indiana |
Power Unit | 12579 | McCulty 100 KW 3-phase generator, Lister 155 HP diesel engine with clutch, everything skid mounted. 2500 hours. Will consider trade for a bandmill. | $8,750.00 |
Indiana |
Power Unit | 12609 | Two 250 HP 3-phase motors with soft starts. $2,000.00 each or $3,500.00 for both. | $3,500.00 |
Indiana |
Power Unit | 12684 | 125 KW General Electric standby genset with emergency backups and disconnects and boxes, Cummins power 220 3-phase. Mounted in 20' container. 1493 hours. | $5,500.00 |
Indiana |
Power Unit | 12844 | Cummins 200 KW genset, 290 Cummins engine with 2000 hours on rebuild. | $5,500.00 |
| Iowa | Power Unit | 10493 | Georgetown Hydraulics hydraulic power pack 550 gal. reservoir, 92 gpm closed center pump, four 40 gpm open center pumps, 18 gpm open center pump, 18" triple pump drive. Includes clutch attachment. No power. | $10,000.00 |
| Iowa | Power Unit | 10987 | Cat 3208 with clutch, good condition, runs fine. | $2,000.00 |
Iowa |
Power Unit | 11744 | 371 Detroit with hydraulic tank and pump | $2,500.00 |
Iowa |
Power Unit | 11745 | 671 Detroit with oil cooler and air compressor. Clutch not included. | $3,500.00 |
Kentucky |
Power Unit | 11593 | Vickers 20 HP hydraulic power packs, includes cooler and double pumps. $1,200.00 each or $2,000.00 for both. | $2,000.00 |
Kentucky |
Power Unit | 11594 | Vickers 10 HP hydraulic power packs, includes cooler and pumps. $1,000.00 each or $1,800.00 for both. | $1,800.00 |
Louisiana |
Power Unit | 11907 | CAT 3406 diesel powered 365KW 600 HP generator, fully enclosed, 50 Hertz, 549 amps, 480 Volts, 1800 rev/min, Excellent condition. | $65,000.00 |
Michigan |
Power Unit | 11714 | 3-cylinder 29 HP diesel power unit, skid mounted, new radiator, new stub shaft, needs electrical. Perfect engine for air compressor or hydraulic pump. | $2,000.00 |
Michigan |
Power Unit | 12519 | Cummins 6BT 152 HP power unit, complete with radiator, fuel tank, twin disk hand clutch, new starter, alternator, and gauge panel. Excellent condition. Stored inside. | $7,000.00 |
Minnesota |
Power Unit | 11271 | White Hercules 6 cylinder D298ER 90HP diesel military motor, recently overhauled. | $2,500.00 |
Missouri |
Power Unit | 12008 | 2001 Iveco 170 HP diesel power unit, 4200 hours. | $7,500.00 |
|
New Listing Missouri |
Power Unit | 12931 | 350 Cummins power unit, rebuilt 32cfm air compressor, rebuilt injector pump, starter, alternator, and oil cooler. AP PTO, 10-groove pulley. | $4,500.00 |
| Montana | Power Unit | 9786 | 250 Cummins diesel power on its own axle. Less than 100 hours on end frame motor overhaul. 10-speed transmission w/PTO shaft. Full gauge package. | $3,500.00 |
| Montana | Power Unit | 12735 | John Deere 4045D diesel power unit, 80 HP, 600 hours | $2,250.00 |
| Montana | Power Unit | 12736 | John Deere/Lima 4239D 37.5 KVA 3-phase genset, 24V with turbo | $1,500.00 |
| Montana | Power Unit | 12737 | Perkins 2048 60KVA 3-phase genset, 11,188 hours | $3,750.00 |
| New Hampshire | Power Unit | 10950 | 3-phase genset, 125 K.V.A. 240-220 V, 100 KW, 300 amps, 60 cycles, 4000 pounds, skid mounted, radiator cooled, P+H aluminum engine. | $1,800.00 |
| New York | Power Unit | 10390 | Isuzu 6-cylinder diesel power unit with PTO clutch, 120 HP. 9000 hours. Still runs good. | $4,500.00 |
| New York | Power Unit | 10391 | 471 Detroit with clutch. Runs excellent. | $3,500.00 |
New York |
Power Unit | 11690 | General Electric 100 HP 3-phase electric motor, 1775 RPM. | $600.00 |
North Carolina |
Power Unit | 12899 | 371 Detroit, brand new clutch and drive | $1,500.00 |
Ohio |
Power Unit | 12126 | John Deere 125 HP hydraulic power unit, 3-hole pump drive, two double Vickers pumps, large tank, hydraulic motor, 6000 watt generator. Complete unit. Skid mounted. Good condition. | $18,000.00 |
Ohio |
Power Unit | 12331 | 220 HP John Deere diesel power unit, Model #: 6076AF-00, excellent mechanical shape, 16150 hours. | $9,500.00 |
Ohio |
Power Unit | 12430 | 1999 Cat 113 KW genset, 200 amp 3-phase. All digital controls. 9000 hours. Includes separate fuel tank. Price firm. | $5,000.00 |
Pennsylvania |
Power Unit | 12051 | 160 HP Cummins diesel power in excellent condition. Offers considered. | $3,500.00 |
Pennsylvania |
Power Unit | 12419 | 3208 Cat with clutch, 210 HP, self contained in metal container, new batteries. | $3,200.00 |
Pennsylvania |
Power Unit | 12420 | Ford Industrial V-8 gas engine with Rockford clutch, governor needs repair. | $750.00 |
South Carolina |
Power Unit | 12424 | Cummins NT270 with PTO shaft and clutch, mounted on skids. Runs good. Starts good. Good oil pressure. | $3,000.00 |
| Tennessee | Power Unit | 10095 | Detroit Diesel 12-cylinder twin-turbo 350 KW genset, under 1000 hours since major overhaul. | $9,000.00 |
| Tennessee | Power Unit | 10827 | Generator 110/220 V, 3600 watt, 5 HP diesel air cooled electric start. Brand new. | $1,000.00 |
| Tennessee | Power Unit | 10828 | Tri-Circle Engineering Model 170-F 5 HP diesel engine, air cooled electric start, muffler, fuel tank, air cleaner. Still in the crate. | $550.00 |
Tennessee |
Power Unit | 11375 | 450 KW genset, powered by Series 60 Detroit, 400 hours on total rebuild. | $11,500.00 |
Tennessee |
Power Unit | 12376 | 471 Detroit motor on skids. Was running fine when removed from service. No over 2,000 hours on a rebuild. | $3,000.00 |
Tennessee |
Power Unit | 12377 | Cummins M11 325 HP diesel motor | $4,000.00 |
Texas |
Power Unit | 12870 | 51 HP Cat diesel engine, purchased new in 2007 for a Wood-Mizer Super Hydraulic, 1026 hours. Last service in November 2009. Still under warranty. | $4,400.00 |
Washington |
Power Unit | 11872 | Perkins 65 KW genset, 1000 hours, mounted on iron frame, 2.5' x 7' footprint. | $6,500.00 |
| Roller Beds | ||||
Indiana |
Rollcase | 12405 | 40' Meadows live rollcase, 24" width, with 2 stop gates and transfer deck and collector deck off either side, 5 HP 3-phase electric | $9,500.00 |
Kentucky |
Rollcase | 12782 | Live 48"x40' heavy rollcase, 3" rollers, hydraulic power and pump, 18 gal. tank. | $5,000.00 |
| Mississippi | Roller beds | 10413 | Winston 24' live heavy duty rollcase with slab dump, 21" width, 6" rollers, stab kickers, 440 3-phase drive with starter and disconnect. | $3,500.00 |
| Routers | ||||
| Colorado | Router | 8785 | Jet Pneumatic High Speed Overarm Router, Model # POR-22-3, 3 Phase power, pneumatic up/down spindle movement, 6 depth of cut adjustments, 2 spindle speeds with foot control, tilting table, air line control to adjust initial plunge speed, restrictor in head to adjust final plunge speed. | $1,500.00 |
| Sawdust Blowers, Sawdust Chains, Cyclones | ||||
Arkansas |
Sawdust | 11944 | Matthews Blow Pipe size 1523 sawdust blower, 14" inlet, 13" outlet, 29" fan. | $900.00 |
| Florida | Sawdust | 8454 | Sawdust blower, 20 HP 3-phase motor, 60' of 10"-12" spiral piping | $4,400.00 |
| Florida | Sawdust | 9320 | Dayton dust vac, 13.5" wheel, 5" exhaust blower, includes 20' 5" flexible hose, 5 HP 3-phase. | $600.00 |
Illinois |
Sawdust | 12536 | Phillips 20" sawdust blower, built heavy duty, 5 HP 3-phase, includes 15' of piping. Little usage. | $1,000.00 |
Indiana |
Sawdust | 12698 | Bruning 20 HP sawdust blower with piping, 13" inlet, 12" outlet. | $1,500.00 |
Kentucky |
Sawdust | 12800 | Two 8" sawdust blowers: Reckart and Cornell. No power. | $1,000.00 |
Missouri |
Sawdust | 11604 | 12" sawdust blower and approximately 120' of 12" pipe, steel elbow. | $2,000.00 |
Missouri |
Sawdust | 11846 | Garden City 35" sawdust blower, 25 HP 3-phase motor, 15" inlet, 14"x14" square outlet with steel adaptor to 12" round, inlcudes 60' of 12" pipe. | $1,500.00 |
Ohio |
Sawdust | 12432 | 50'' sawdust blower, 40 HP motor with starter. Price firm. | $3,000.00 |
Ontario |
Sawdust | 12372 | TimberWolf sawdust blower, 6 inlet, 6" outlet, 1300 cfm, 3 HP 220 V. Original owner. Still brand new. Never used. | $1,000.00 US$ |
| Pennsylvania | Sawdust | 10971 | Sawdust blower, 11" inlet, 10" outlet. No power. | $750.00 |
Texas |
Sawdust | 12042 | Reese-Memphis C530 3-bag, 180 gallon sawdust collection system, 2500 cfm, 5 HP 3-phase. Mint condition. | $1,500.00 |
| Virginia | Sawdust | 12318 | Overhead sawdust auger leveling, truck loading for open top trailers w/steel frame | $3,500.00 |
| Wyoming | Sawdust | 9289 | Reckart sawdust blower, 8" inlet, 8" outlet, 15 HP 3-phase, includes piping and elbows | $1,800.00 |
| Saws | ||||
Kentucky |
Saw | 11512 | Simonds 60" circle blade. Almost brand new. | $1,000.00 |
| Missouri | Saws | 9752 | 56" inserted tooth headsaw, good condition | $1,000.00 |
Ohio |
Saws | 12607 | Simonds 52" insert tooth sawblade, hammered for a left hand mill. | $450.00 |
Wisconsin |
Saws | 11747 | 56" inserted tooth headsaw, in excellent condition. | $1,050.00 |
| Shapers | ||||
Oregon |
Shaper | 11664 | Custom built double head shaper with tongue and groove knives, handles up to 6" material, two 2 HP single phase motors. | $1,500.00 |
| Sharpeners (Band) | ||||
Louisiana |
Sharpener: Band | 12636 | Baker Quick-Sharp sawmill mounted automatic sharpener with Dino setter | $1,200.00 |
Louisiana |
Sharpener: Band | 12841 | Cooks Cat Claw automatic sharpener with Suffolk dual tooth setter. | $1,650.00 |
|
New Listing New Jersey |
Sharpener: Band | 12939 | Dino semiautomatic band sharpener with manual setter | $1,200.00 |
Oregon |
Sharpener: Wide Band |
11451 | Povlsen automatic wide bandsaw grinder, works best on 1 3/4" tooth spacing | $1,200.00 |
Pennsylvania |
Sharpener: Band | 11478 | Wright automatic sharpener with manual setter | $1,200.00 |
Virginia |
Sharpener: Wide Band |
12273 | Two #220 Hanchett left hand grinders with stands. One #230 Hanchett right hand grinder with stands. | $6,000.00 |
| Wyoming | Sharpener: Band | 10685 | Hanchett #5 sash gang grinder, 3-phase power. | $2,500.00 |
| Sharpeners and Benching Equipment (Circle) | ||||
Arkansas |
Sharpener: Circle Mill | 11303 | Armstrong #17 grinder with 2 cams. Also sharpens trimmer and edger saws. | $1,500.00 |
| Georgia | Sharpener: Circle Mill | 9173 | Hoe Model 10 tooth grinder. | $350.00 |
Idaho |
Sharpener: Circle Mill | 12574 | Hanchett 104C, SN 194, 72" combination bench stretcher rolls complete with full hydraulic assist, anvil, electric boxes and assorted hardware. Only needs hammer and saw gauge. | $3,500.00 |
| Sharpeners (Other) | ||||
| New Mexico | Sharpener: Knife | 10262 | 4-place knife grinder. Used to make and sharpen moulding knives | $3,000.00 |
| New Mexico | Sharpener: Knife | 10263 | 2-place knife grinder. Used to make and sharpen moulding knives. Used mainly with the Glover dowel machine | $2,000.00 |
| New Mexico | Sharpener: Knife | 10264 | Electric set up stand. 2 HP motor with belt drive | $2,000.00 |
Pennsylvania |
Sharpener: Knife | 12663 | SCMI knife grinder with Preset 25 alignment system | $4,000.00 |
| Slab Belts/Racks | ||||
| None currently available. | ||||
| Sorting Tables/Decks | ||||
| New Mexico | Sorting Table | 10267 | 12" x 20' trim tables and sorting tables | $3,000.00 |
Wisconsin |
Sorting Table | 12619 | Custom built 8' sorting round table, single phase electric motor with reduction gear. Can demonstrate. | $1,000.00 |
| Sweep Tables | ||||
| Connecticut | Sweep Table | 8995 | Sweep table, 8'x12', pushes boards and edgings from edger to outfeed conveyor. Designed for edgerman to offload boards and send edgings away from the sawmill and edger. 3 HP 3-phase power. | $2,500.00 |
| Stacking Decks | ||||
|
None currently available | |||
| Table Saws | ||||
New Jersey |
Table Saw | 12293 | Grizzly table saw with custom jig and air clamp for producing wedges/hubs. Accepts 1 ¾” square stock and makes 6”, 9”, 12” wedges | $1,200.00 |
| Top Saws | ||||
Michigan |
Top Saw | 11096 | CMC top saw system with arbor, 30 HP motor and starter, no blade. | $2,500.00 |
| Trailers | ||||
| Ohio | Trailer | 10891 | 1969 Great Dane 45' single drop trailer, completely new break system, new wiring, new air system. | $9,500.00 |
Indiana |
Transfer Deck | 12406 | Custom built 3-strand live transfer deck, 8' width x 10' length, hydraulic motor, does not include power pack or pump | $1,950.00 |
|
Missouri |
Transfer Deck | 11370 | Baker speedup/crossover deck, hydraulic motor included. | $3,500.00 |
Missouri |
Landing Deck | 12411 | 10' live landing deck to green chain, 3-phase power. | $1,000.00 |
| Trucks | ||||
Indiana |
Truck | 12069 | 1986 GMC roll back (the bed rolls back) truck, CAT diesel motor, 5 spd transmission, includes a large winch. | $6,000.00 |
Maryland |
Truck/ Trailer | 11272 | 1990 Dodge 1-ton, new 5-speed transmission, 5.9 Cummins, new tires, 8' diamond plate aluminum flatbed, replaced rear end with Dana Super Duty. Fully customized with 48" sleeper, two 50 gal. stainless steel fuel tanks. | $8,500.00 |
| Pennsylvania | Truck | 10599 | 1979 Ford tandem log truck with Prentice Model H knuckleboom loader, 44800 GVW, double valve 180-degree turn, 4-post log bed, headache rack, 6V53 Detroit engine. Solid truck. Road worthy. Kept inside. | $8,000.00 |
Pennsylvania |
Truck | 11342 | 1974 Mack Interstater, 237 motor, 5-speed, 387 Mack rearends, motor completely rebuilt, custom rolled and pleated interior, drive tires are all new recaps. | $5,000.00 |
Pennsylvania |
Truck | 12107 | 1977 Kenworth, custom built 26' industrial tandem tilt bed for hauling skidders, dozers, other heavy equipment, two 11' triple mast cylinders, can tilt straight up or has separate valve that moves bed 11' back before tipping, 3406 Cat motor, 13-speed Road Ranger transmission, 20-ton Braden winch, double framed. | $18,500.00 |
Wisconsin |
Truck | 12117 | 2000 Sterling sawdust truck, 210 Cat diesel motor, 7-speed, new 18' steel dump box, 5' sides, new roll top, good tires, 33,000 GVW. 212,000 miles. | $29,000.00 |
All information as to age and condition of these used sawmills listed by Sawmill Exchange is supplied by the sawmill owners. No warranty is either expressed or implied by Sawmill Exchange.
All equipment listed above is for sale by private owners. If you are interested in talking with any of the owners about their equipment for sale, please contact us at: U.S. Toll Free: 800-459-2148 / Local: 205-969-0007
Links to Equipment for Sale Pages
Manual Feed Band Sawmills
Automatic Feed Band Sawmills
Hydraulic Band Sawmills
Higher Production Band Sawmills
1-2 Man Circular Sawmills
Handset Circular Sawmills
Auto/Semiauto Circular Sawmills
Support Equipment
Complete Sawmill
Operations
Auxiliary Equipment
Industrial Equipment